- Scrambler, Other
- No. Cylinders:
- Build type:
- Engine size:
- York, UK
- Days listed:
- 1 day
Tell us about your bike
Reynolds Custom Motorcycles
Tel. 07828 999860
Here you have a unique opportunity to jump the waiting list on a full custom build from us due to a customers unfortunate change in circumstance .
The bike in question is this absolutely stunning black BMW r100.
Where to start on this, the original bike started off as a lovely low milage r100 before been completely stripped of every nut and bolt and all taken back to bare metal.
The frame was then shaved of any unnecessary tabs and parts, battery tray rear exhaust and footpeg hangers etc..
One of our hand made subframes was then fabricated and fitted to the frame and then professionally painted in a beautiful deep gloss black.
Front Forks were stripped lowered and rebuilt with new springs , fluids and gators. The old mudguard mount was the drilled and tapped to accept the Motogadget front indicators. Once completed it was painted to match the frame.
Swing arm and bevel gear stripped and rebuilt with new fluids, rubbers stainless clips , filler and drain bolts and then painted to match the frame and forks.
Wheels stripped and rebuilt , powder coated gloss black then new knobbly tyres fitted and balanced.
The Engine was completely stripped vapour blasted and then rebuilt and reconditioned , stainless push rod tubes and fasteners used all around, airbox delete now housing a small hidden lithium Battery and fuses.
Gearbox completely stripped and reconditioned
Then all professionally painted Matte black.
New clutch kit fitted
New starter motor
Carbs stripped and sonically cleaned then rebuilt with new jets, diaphragms , o rings, gaskets
, floats and springs.
New pod style air filters.
Custom made exhaust pipes, wrapped.
Petrol tank stripped back to bare metal then painted deep gloss black, this is like a mirror . New badges , Billet alloy filler cap, new fuel taps lines and filters.
One off hand made seat finished in fluted black leather.
Custom made rear under tray .
Reynolds custom motorcycles lightweight billet alloy top yoke with risers and ABM handlebars
Upgraded Brembo master cylinder and levers.
New throttle control along with new throttle cables and clutch cable.
Motogadget Switch gear along with a Motogadget Motoscope pro digital speedo completes the cockpit.
Lighting is taken care of with an LED front light and Kellerman Atto 3 in 1 tiny rear lights tapped into the rear subframe .
Electrics are powered by a Motogadget M unit blue this basically turns everything from analogue to digital.
Keyless ignition , Downloadable App for your phone so you can then use your phone as an ignition key and also alter parameters on the bike like how the indicators flash, lighting operates etc.. set up service intervals. Activate the alarm immobiliser tracker and so on.
Complete new loom.
Ignition leads and plugs.
Brembo Brake callipers have been completely stripped and rebuilt with new seals and rubbers, new Venhiel Brake lines, Uprated Brembo floating brake discs.
Rear suspension is taken care of with a YSS Z series adjustable rear shock.
Custom made rear numberplate hanger.
100s of hours labour is involved in building a showstopper like this, it rides and sounds as good as it looks.
The bike will come with 12 moths MOT for the new owner.
Private plate not included original reg number is K784 NGB
We have built bikes for people in several countries around the world and would suggest Shippio for worldwide shipping.
Any questions please feel free to contact me on 07828 999860 or through our website www.reynoldscustommotorcycles.com instagram @reynoldscustomcycles